Another FD Custom Cluster With Speedhut Gauges

• Another FD Custom Cluster With Speedhut Gauges by Broadfield on 22 Mar, 2015 15:33
• 
  
  
  
  
  
  
  
  
• #1 by Jordan Innovations on 22 Mar, 2015 15:54
• Another great job Toby.  What are the LED indicators and the knob for?  Idiot lights and a line driver?
• #2 by digitalsolo on 22 Mar, 2015 16:13
• Knob looks like the Speedhut combo dimmer?
  
  Nice work!   I've built some of these type of setups and whatever you charge isn't enough.   It's a ton of work to get these things that nice!
• #3 by spacevomit on 22 Mar, 2015 16:22
• Beautiful work.
• #4 by gnx7 on 23 Mar, 2015 16:09
• is that the stock cluster front facia or aftermarket?  wish my speedhut gauge setup looked that good....
• #5 by Jordan Innovations on 23 Mar, 2015 16:33
• That's been custom grafted into the bezel, not the factory gauge cluster.  There was a ton of finish work put into filling the original holes, fitting the gauges, then texturing and finishing the front - and I'm guessing Toby left the wiring for the customer.  If you wanted to pay for that, send yours to him too.
• #6 by Gunnytron on 23 Mar, 2015 17:06
• Another awesome set. I was massively surprised how long it's taken me to do mine and it's not even finished.
  
  If I did it again... well I wouldn't, I would get Broadfield to do it.
• #7 by Broadfield on 03 Apr, 2015 10:32
• Quote from: gnx7 on 23 Mar, 2015 16:09

  is that the stock cluster front facia or aftermarket?  wish my speedhut gauge setup looked that good....
  

  
  As Jeff noted, I take your OEM facia and make into what you see... or whatever you want for that matter.  To get away from the norm, I think it would even be cool to do three large gauges.  So a 4" quad gauge on the left, a 4.5" tach in the middle and then a 4" GPS speedo on the right.  It would be symmetrical and still give you 6-7 meter types in the cluster... the 4" speedo could be a dual GPS speedo to get one more meter type in there for a total of 7.  At any rate, here are a few basic images of the process:
  
  
  
  
  
  
  
  
  
  
  
  
  
  
• #8 by Jordan Innovations on 03 Apr, 2015 11:44
• Very cool pics of progress!
• #9 by turbotalon1g on 03 Apr, 2015 21:01
• What were the LEDs and knob?
  
  Amazing work.
• #10 by Broadfield on 11 Apr, 2015 15:11
• Quote from: turbotalon1g on 03 Apr, 2015 21:01

  What were the LEDs and knob?
  
  Amazing work.
  

  
  This particular customer wanted the Speedhut dimmer knob mounted to the facia and also requested 4 LED warning lamps for various things.  I can also have Speedhut add warning lights into the tach... like they do on the speedo.
• #11 by coltboostin on 14 Apr, 2015 23:07
• That Yellow Speedo is just so damn nice