April 14, 2021, 09:38:28 PM

Author Topic: Carbon fiber sunroof insert  (Read 207 times)

Offline greencar

Carbon fiber sunroof insert
« on: March 31, 2021, 06:59:09 AM »
I am considering replacing my roof insert ,its rusty, the sunroof does not operate and will  not. What has your experience been with them? Who makes them?
Thanks for any input
Ed
I have a 1987 rx7 that has been setup for land speed racing. 4.8 LS engine being built with a T5 transmission.

Offline shainiac

Re: Carbon fiber sunroof insert
« Reply #1 on: March 31, 2021, 07:58:48 AM »
The only carbon fiber sunroofs that I've seen or used bolted to the stock sunroof motor/frame. There are/were carbon sunroof "plugs" for the FD, but I don't think there is one available for FC.
LRB makes an aluminum rivet-on panel that fits well and allows you to remove the entire sunroof motor/track. If you do a little trimming to the sheet metal, you can actually fit a non-sunroof headliner also. That's what I did and it shed almost 30# from the roof and added noticeable head room.
'88 TII -  SBE 5.3L, Twin EFR 6758s, T56 Magnum, Ronin 8.8" IRS, MS3Pro Ultimate
716whp/662wtq @1.3bar