April 02, 2020, 12:11:24 PM

Author Topic: Mounting harness submarine belt  (Read 410 times)

Offline wompa164

Mounting harness submarine belt
« on: March 12, 2020, 03:01:31 PM »
Hi guys,

Please ignore my filthy car (this was taken as a reference pic before teardown). My chassis/safety shop installed my Schroth 6pt according to the picture below:



It seems this goes against most of the instructions I see, which only want the sub straps mounted +/- 20 degrees from vertical.



I would really rather avoid drilling the floor pan and installing a spreader plate, but I'd rather do that than die in an accident. Anyone have experiencing mounting sub straps in our cars? I thought about using a strong steel bar that runs horizontally between the brackets to mount them to instead, so they don't have to run so far back.

Offline Cobranut

Re: Mounting harness submarine belt
« Reply #1 on: March 12, 2020, 09:08:37 PM »
That looks like a nut-buster. You definitely want to move those forward.
1995 FD, 7.0 Liter stroked LS3, T56, 8.8, Samberg kit.