September 20, 2020, 06:53:29 PM

Author Topic: Flash To Pass Lens  (Read 629 times)

Offline smeddler

  • Supporting Member
  • In The Bleach Box
  • Location: Southern Ct
  • Posts: 97
  • View Gallery
    • View Profile
Flash To Pass Lens
« on: February 12, 2020, 10:16:04 AM »
What is the best  way to remove the flash to pass lens without breaking them so I can clean them on an FC.   Thanks For Info

Offline digitalsolo

  • Administrator
  • Top Fuel
  • Location: Fort Wayne, IN
  • Posts: 23181
  • View Gallery
    • View Profile
    • LS1FC.com
Re: Flash To Pass Lens
« Reply #1 on: February 12, 2020, 11:26:37 AM »
They unbolt from the back of the bumper.    Usually the bolts break out of the lenses though;   If they do, just epoxy them back in place.
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...  project car
2016 BMW 428i xDrive Gran Coupe - Completely stock...ish

Offline smeddler

  • Supporting Member
  • In The Bleach Box
  • Location: Southern Ct
  • Posts: 97
  • View Gallery
    • View Profile
Re: Flash To Pass Lens
« Reply #2 on: February 12, 2020, 03:39:41 PM »
Got them out, the threads were stuck on the rubber bumper and I had to push on the bolts, not the rear of the lens to get them out. Thanks Blake

Offline largeorangefont

  • Top Fuel
  • Location: So Cal
  • Posts: 6772
  • I steer with the gas pedal.
  • View Gallery
    • View Profile
Re: Flash To Pass Lens
« Reply #3 on: February 13, 2020, 10:29:28 PM »
I drilled the holes a bit bigger in the bumper for the studs on the FTP lenses. It made putting it back together easier too.

I JB welded the studs back into the lens.
Quote from: cool
Sell it to spacevomit.  He'll finish it.