February 23, 2020, 12:04:10 PM

Author Topic: Facebook manages a relevant ad. CAN PDM CHEAP  (Read 236 times)

Offline Exidous

Facebook manages a relevant ad. CAN PDM CHEAP
« on: February 09, 2020, 03:26:10 PM »
https://www.hardwire-electronics.co.uk/productcategories

Their big setup has 25 20A outputs and <1000£ ($1300USD) or 15 20A outputs for <700£.

No reversing outputs for windows it seems though.

I don't see any can standards listed so you may have to add in what CAN you are using yourself but this is cheap!

Color me intrigued.
94 BB SBE LS1 Full Mamo top, MS3ProU with TC, RONIN 8.8 and another custom dual 2.5" stainless exhaust. Not too loud with the new resonators!

Offline digitalsolo

  • Administrator
  • Top Fuel
  • Location: Fort Wayne, IN
  • Posts: 22898
  • View Gallery
    • View Profile
    • LS1FC.com
Re: Facebook manages a relevant ad. CAN PDM CHEAP
« Reply #1 on: February 09, 2020, 04:43:38 PM »
Thatís a solid setup for that price!
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...  project car
2016 BMW 428i xDrive Gran Coupe - Completely stock...ish

Offline Exidous

Re: Facebook manages a relevant ad. CAN PDM CHEAP
« Reply #2 on: February 10, 2020, 03:09:18 AM »
I sent them a message about CAN. They are planning on releasing native support for various ECU protocols later
94 BB SBE LS1 Full Mamo top, MS3ProU with TC, RONIN 8.8 and another custom dual 2.5" stainless exhaust. Not too loud with the new resonators!

Offline wompa164

Re: Facebook manages a relevant ad. CAN PDM CHEAP
« Reply #3 on: February 12, 2020, 12:33:40 PM »
Interesting. I noticed it uses Deutsch DT pins which are only rated to 13A continuous, how are the outputs rated at 20A?

PWM is definitely the future but it's a huge hurdle to get wired up, I'd throw real money at anyone that made an FD-specific harness.


Offline Exidous

Re: Facebook manages a relevant ad. CAN PDM CHEAP
« Reply #4 on: February 12, 2020, 08:35:12 PM »
It's weird. In the instructions they say "it's limited to 20A. The pin in the connector sets the limit." But as you say, the connector is a 13A rated pin.
94 BB SBE LS1 Full Mamo top, MS3ProU with TC, RONIN 8.8 and another custom dual 2.5" stainless exhaust. Not too loud with the new resonators!