September 20, 2020, 07:46:41 PM

Author Topic: FD Radiator Core Group buy  (Read 4963 times)

Offline justinsamberg

  • Moderator
  • Staged
  • Location: Pleasant Hill, California
  • Posts: 585
  • 925 212 5542
  • View Gallery
    • View Profile
FD Radiator Core Group buy
« on: January 14, 2020, 12:07:36 AM »
       
   


I've decided to do one more run of fd radiators and source all other necessary parts. I plan to make 18 units because I have a minimum of requirement to meet to get my cores made.


All the part numbers are listed below.






  KNN RP5135



   
                       Spal Electric Fans 30102054




   
This unit has a little more output than the paddle blade and in my opinion its worth the $$           
      SPAL 11" Extreme Performance Fan 12V  Manufacturer's Part Number:
30102800       






                  Howe Surge Tanks 3424








                Qty 2 90 Degree Elbow for 3/8" Hose ID x 3/8 NPTF Male







qty 2   10mm X 1.25 x 16  flange bolt holds tank to cylinder head





                Qty 1 90 Degree Elbow for 1/4" Hose ID x 1/4 NPTF Male







                UPPER HOSE  DAYCO 72044





              qty 4   Soft Hose/Tube, 430 Stainless Steel, 4" to 4-3/4" Clamp ID




             LOWER HOSE DAYCO 71982






            qty 1   1/4 pipe plug






The filter hold downs are not shown but are included in the sale.

$850 plus shipping X 18 people

The packaging will be small and lite so shipping to australia and canada won't be a problem.
« Last Edit: January 22, 2020, 04:02:55 AM by justinsamberg »
Pleasant Hill, CA
justinsamberg@gmail.com
925-212-5542

Offline tai-lun

Re: FD Radiator Core Group buy
« Reply #1 on: January 19, 2020, 03:31:12 AM »
Is the core dual-pass or any changes from your previous version? And is there a drain plug at the bottom, I had I think a V2 unit and don't remember a drain at the bottom.
Tai - 93 LS2 Ronin Widebody FD
Build Thread: https://www.norotors.com/index.php?topic=9172.150

Offline justinsamberg

  • Moderator
  • Staged
  • Location: Pleasant Hill, California
  • Posts: 585
  • 925 212 5542
  • View Gallery
    • View Profile
Re: FD Radiator Core Group buy
« Reply #2 on: January 19, 2020, 05:30:28 AM »
It is dual pass,..  but that's only because both fittings are on the right side of any LS engines. 

Im going to add this 1/8" petcock for draining.

Pleasant Hill, CA
justinsamberg@gmail.com
925-212-5542

Offline tai-lun

Re: FD Radiator Core Group buy
« Reply #3 on: January 19, 2020, 10:06:21 PM »
Cool works for me, put me down for one. I'll start a list:

1. Tai - Rad (minus intake and surge tank)
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Tai - 93 LS2 Ronin Widebody FD
Build Thread: https://www.norotors.com/index.php?topic=9172.150

Offline oneevilrx7

Re: FD Radiator Core Group buy
« Reply #4 on: January 27, 2020, 04:23:56 PM »
I'M IN ON THE GB, PUT MY NAME DOWN, STALIN RAMIREZ. STALINRAMIREZ1976@GMAIL.COM

Offline justinsamberg

  • Moderator
  • Staged
  • Location: Pleasant Hill, California
  • Posts: 585
  • 925 212 5542
  • View Gallery
    • View Profile
Re: FD Radiator Core Group buy
« Reply #5 on: January 27, 2020, 04:38:51 PM »
1. Tai - Rad (minus intake and surge tank)
2.oneevilrx7
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.

Just so you guys know, I'm only selling the bare radiator this time around.  The rest of the parts you'll have to source yourself.
Pleasant Hill, CA
justinsamberg@gmail.com
925-212-5542

Offline Dd2170

Re: FD Radiator Core Group buy
« Reply #6 on: February 19, 2020, 11:10:21 PM »
1. Tai - Rad (minus intake and surge tank)
2.oneevilrx7
3. Dd2170
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.

Offline Joel

Re: FD Radiator Core Group buy
« Reply #7 on: April 14, 2020, 05:18:20 PM »
Is this still a go? Any update on the current status of this?
Thanks!

Offline Daniel1286

Re: FD Radiator Core Group buy
« Reply #8 on: April 24, 2020, 10:50:14 AM »
I'm also interested

Offline wongjonsilver

Re: FD Radiator Core Group buy
« Reply #9 on: May 17, 2020, 03:15:00 AM »
Would like to get in on this GB. Is there any traction for it moving forward?

It is dual pass,..  but that's only because both fittings are on the right side of any LS engines. 

Im going to add this 1/8" petcock for draining.