November 26, 2020, 04:01:46 AM

Author Topic: New member!! Ontario, Canada  (Read 618 times)

Offline maunder808

New member!! Ontario, Canada
« on: January 13, 2020, 05:00:35 PM »
Hey everyone,

My name is AJ. Just grabbed a RHD fd3. I posted pics in the facebook group but i'll post here as well. I'm planning an ls1 or 2 making around 600hp. Should be plenty for the car. Mated to a t56 and low to the ground. I was told the front fenders are 30mm over sized, so they're noticeably wider. They are for sure fiberglass fenders. Not sure if i'll keep those or not, or match the back to them. Time will tell.  Other than that I haven't planned much. I am excited to see where this goes though!!

Offline digitalsolo

  • Administrator
  • Top Fuel
  • Location: Fort Wayne, IN
  • Posts: 23266
  • View Gallery
    • View Profile
    • LS1FC.com
Re: New member!! Ontario, Canada
« Reply #1 on: January 13, 2020, 06:59:00 PM »
Welcome to the forum!   Sounds like a fun project!
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...  project car
2016 BMW 428i xDrive Gran Coupe - Completely stock...ish

Offline paul_3rdgen

  • Supporting Member
  • Launching!
  • Location: Canada
  • Posts: 1255
  • View Gallery
    • View Profile
Re: New member!! Ontario, Canada
« Reply #2 on: January 17, 2020, 09:27:46 AM »
Welcome!  Your not alone there are a few of us in Ontario. :)
93 RX7 R1 500rwhp
LS2, H/C combo... ARE drysump
Race Logic traction Control and 4 wheel Stoptech BBK
3.73 gears installed in the stock diff  :o

Offline maunder808

Re: New member!! Ontario, Canada
« Reply #3 on: January 20, 2020, 08:53:43 PM »
Welcome!  Your not alone there are a few of us in Ontario. :)

Perfect!! people close enough to answer questions and perhaps show me things if I need a visual! 8)

Offline paul_3rdgen

  • Supporting Member
  • Launching!
  • Location: Canada
  • Posts: 1255
  • View Gallery
    • View Profile
Re: New member!! Ontario, Canada
« Reply #4 on: January 20, 2020, 08:59:18 PM »



Sent from my iPhone using Tapatalk
93 RX7 R1 500rwhp
LS2, H/C combo... ARE drysump
Race Logic traction Control and 4 wheel Stoptech BBK
3.73 gears installed in the stock diff  :o