October 22, 2019, 02:50:58 PM

Author Topic: 8.8 fc solid grannys kit with an anti-roll bar easy install  (Read 176 times)

Offline Fc3sluis

8.8 fc solid grannys kit with an anti-roll bar easy install
« on: September 23, 2019, 03:29:51 AM »
I felt like this would be good info for some of us with the granny 8.8 solid kit that are having body twist issues like I was having.
So I bought a 
UPR Products Anti Roll Bar Pro Street Chrome Moly (79-04 Mustang) 
And made it fit to my FC.

Offline Fc3sluis

Re: 8.8 fc solid grannys kit with an anti-roll bar easy install
« Reply #1 on: September 23, 2019, 03:32:09 AM »
So I bought a sheet of steel at home depot and used the original sway bar bolt holes to make a bracket to hold the anti roll bar links. I haven't tested this out yet at the track yet. Will post with an update

Offline Fc3sluis

Re: 8.8 fc solid grannys kit with an anti-roll bar easy install
« Reply #2 on: September 23, 2019, 03:35:24 AM »
I forgot to note that I did have to buy longer rods since they had to be longer than what came with the kit. The thread of the rod needed is 3/8-24, one side has to be counter thread

Offline Fc3sluis

Re: 8.8 fc solid grannys kit with an anti-roll bar easy install
« Reply #3 on: October 05, 2019, 09:49:12 PM »
Car launches more straight, and I still have the front sway bar installed