August 21, 2019, 05:09:42 AM

Author Topic: FD front spindles  (Read 411 times)

Offline gnx7

FD front spindles
« on: January 24, 2019, 01:53:50 AM »
I'm looking for a pair of front FD spindles.  I don't need the dust shields.... I'm going to cut them off anyway.

Shipped to San Ramon, CA 94583
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline spacevomit

Re: FD front spindles
« Reply #1 on: January 24, 2019, 11:01:17 AM »
I have pair of new OEM ones with zero miles. I got the PBM knucks so I dont need them. Let me double check what I paid.

Ok. Right now theyre $278.61 per side. However, I paid 259.39 per side, so we can use that price as a reference point. I'd take $500 + shipping.
« Last Edit: January 24, 2019, 11:11:05 AM by spacevomit »

Offline gnx7

Re: FD front spindles
« Reply #2 on: January 24, 2019, 11:36:35 AM »
This is mainly for mock up so I need some good used ones....
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline Ls2Rx7

Re: FD front spindles
« Reply #3 on: January 25, 2019, 02:26:11 AM »
I have some. ill let them go for 125 plus shipping
Ls2, Tick Sns 2 cam, A&a c6 kit, LS3 top end, 760/640 @ 13.5 psi

Offline gnx7

Re: FD front spindles
« Reply #4 on: February 04, 2019, 01:42:04 PM »
I ended up buying a complete Z7 Z06 front subframe/suspension/14.5" brakes/steering rack for a smoking price.  I was going to run stock FD front suspension on another project (non RX-7); however this Z06 stuff is just soo much beefier/better.
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com