August 06, 2020, 08:35:34 AM

Author Topic: Halfspec A/C lines for LS3/Denso NEW  (Read 1006 times)

Offline AZieger

Halfspec A/C lines for LS3/Denso NEW
« on: January 04, 2019, 10:06:35 PM »
New and unused, made for the Camaro LS3 compressor, Samberg radiator and Denso evaporator.  I got these along with a bunch of other swap parts all at once, not realizing that my car has the Mana style evaporator which has larger fittings.  I decided to make all new lines and bought the tools to do so, so these are up for grabs.

These used to go for $430 with the fire sleeve (and a $20 dryer bottle, not included).  Asking $250 shipped.

Offline gnx7

Re: Halfspec A/C lines for LS3/Denso NEW
« Reply #1 on: January 05, 2019, 07:46:00 PM »
If these work for theLS3  e-Rod swap in an FD I'll take them.  Please PM me your contact info.
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline AZieger

Re: Halfspec A/C lines for LS3/Denso NEW
« Reply #2 on: January 05, 2019, 08:06:47 PM »
Well, I'm no expert.  But they would have worked on my '13 Camaro SS pullout had it not been for the Mana evaporator in my car.  You will need a compressor adapter block like the one shown in this photo, and the Halfspec recommended drier bottle.

Offline AZieger

Re: Halfspec A/C lines for LS3/Denso NEW
« Reply #3 on: January 09, 2020, 12:04:22 AM »
$150 shipped someone take these off my hands!

Offline SmogSUX

Re: Halfspec A/C lines for LS3/Denso NEW
« Reply #4 on: January 16, 2020, 08:33:02 PM »
Link for the compressor adapter? I'm trying to figure out if this will work with my LS3 that's using an LS1 PEZ harness and adapters.


Offline tckracker

Re: Halfspec A/C lines for LS3/Denso NEW
« Reply #6 on: July 31, 2020, 01:36:43 PM »
Iím interested, if this is still available.
-shaun