January 25, 2020, 07:49:32 PM

Author Topic: Fabbing an ITB Intake  (Read 2257 times)

Offline Cobranut

Re: Fabbing an ITB Intake
« Reply #15 on: August 07, 2018, 09:01:09 PM »

I already checked them out.
They're only 46mm, and they still stick too far out from the side of the head.

My TB's will have to be positioned vertically, with the airhorns pointing up, to fit into the available space.

Esslinger Engineering has done some similar intakes, so I'll probably have them fab it since they already have the head flange CNC program.
1995 FD, 7.0 Liter stroked LS3, T56, 8.8, Samberg kit.

Offline babillaracing

Re: Fabbing an ITB Intake
« Reply #16 on: August 09, 2018, 11:35:45 AM »
cool good luck with the project