May 29, 2020, 05:17:03 AM

Author Topic: J-AUTO FD pillow ball bushings  (Read 4880 times)

Offline Juan

  • Moderator
  • Pre-Staging
  • Location: Pomona, CA
  • Posts: 109
  • I'm a tall midget
  • View Gallery
    • View Profile
    • J-AUTO
J-AUTO FD pillow ball bushings
« on: October 28, 2014, 03:27:52 AM »


J-AUTO upgraded pillow balls for 1993+ Mazda RX-7s are finally here! Completely made in the U.S.A. using American steel and top shelf motorsports grade teflon lined spherical bearings for long lasting operation. Your FD's rear end will feel more accurate and tighter giving you an awesome ride around town and great handling out on the track! Get rid of those annoying clunk sounds every time you're backing out of your parking space or when you're stuck in stop and go traffic.

J-AUTO pillow balls can be rebuilt by replacing the spherical bearing within for a fraction of the cost of the original bushing set. Not only are these initially cheaper than OEM bushings, but they're cheaper to own in the long run! These are 100% direct replacements for original Mazda pillow balls and are compatible with original pillow ball dust seals for an extra layer of protection. No modification to your car required.

Starting at $330 per kit (6 bushings). In stock and ready to ship!
There's already many sets out in circulation with 100% positive feedback from happy customers!

Pillow ball installs are available by appointment. Save $50 on labor when you purchase and have your pillow ball kit (6 bushings) installed!

Get yours at www.j-auto.net and if you're on Facebook, check us out www.facebook.com/jauto








 ;)
« Last Edit: January 12, 2015, 06:43:59 PM by Juan »

Offline Juan

  • Moderator
  • Pre-Staging
  • Location: Pomona, CA
  • Posts: 109
  • I'm a tall midget
  • View Gallery
    • View Profile
    • J-AUTO
Re: J-AUTO FD pillow ball bushings
« Reply #1 on: December 16, 2014, 12:50:56 PM »
Big thanks to everyone who purchased these pillow balls and for the positive feedback I've received. A new batch of bushings is in the final stages of production and should be in my hands towards the end of the week.

Please pre-order your bushings at www.j-auto.net to secure your kit as I already have a few kits pre-ordered/accounted for. Current introductory pricing is still valid for all pre-orders  8)

Offline ncaudio

  • Supporting Member
  • Staged
  • Location: Central North Carolina
  • Posts: 564
  • Gearhead
  • View Gallery
    • View Profile
Re: J-AUTO FD pillow ball bushings
« Reply #2 on: January 06, 2015, 09:39:39 PM »
Just ordered a set with the seals
'88 FC LS T56, 94 FD LS T56, '93 FD was LS turbo T56 Ford 8.8 IRS Ablake's old car (project)

Offline Juan

  • Moderator
  • Pre-Staging
  • Location: Pomona, CA
  • Posts: 109
  • I'm a tall midget
  • View Gallery
    • View Profile
    • J-AUTO
Re: J-AUTO FD pillow ball bushings
« Reply #3 on: January 10, 2015, 02:47:13 AM »
Still have a few more pillow ball kits left. Get yours before this batch runs out and price goes up! Get yours at www.j-auto.net :icon_tup:

Just ordered a set with the seals

 :cheers: Thanks again!

Offline wickedrx7

Re: J-AUTO FD pillow ball bushings
« Reply #4 on: January 10, 2015, 04:52:14 PM »
What is regular price on these?

1993 Touring, 2012 L99, T-56, Ronnin 8.8, Ohlins, Speedhut, Samberg and lots of custom parts
Build Thread - http://www.norotors.com/index.php?topic=19354.0
Pictures - www.flikr.com/wickedrx7

Offline Juan

  • Moderator
  • Pre-Staging
  • Location: Pomona, CA
  • Posts: 109
  • I'm a tall midget
  • View Gallery
    • View Profile
    • J-AUTO
Re: J-AUTO FD pillow ball bushings
« Reply #5 on: January 12, 2015, 06:43:01 PM »
What is regular price on these?

Pricing is now $330 for 6 pillow ball bushings without dust seals or $405 for 6 pillow balls with 12 dust seals. Prices are plus shipping. My website has been updated to reflect the current prices.

Thanks,
Juan

Offline Cavity_Filla

  • In The Bleach Box
  • Location: Portland, Oregon
  • Posts: 89
  • View Gallery
    • View Profile
Re: J-AUTO FD pillow ball bushings
« Reply #6 on: January 13, 2015, 12:25:05 AM »
Awww, damn, I was going to jump on these. But I waited too long and the price went up a lil bit.

I'm still going to get them.... :-[

Offline Juan

  • Moderator
  • Pre-Staging
  • Location: Pomona, CA
  • Posts: 109
  • I'm a tall midget
  • View Gallery
    • View Profile
    • J-AUTO
Re: J-AUTO FD pillow ball bushings
« Reply #7 on: January 14, 2015, 01:32:59 AM »
Awww, damn, I was going to jump on these. But I waited too long and the price went up a lil bit.

I'm still going to get them.... :-[

These are in stock for whenever you're ready  :cheers: