May 20, 2019, 04:40:12 AM

Author Topic: FC Integra Speedometer Customization  (Read 2082 times)

Offline digitalsolo

  • Administrator
  • Top Fuel
  • Location: Fort Wayne, IN
  • Posts: 22575
  • View Gallery
    • View Profile
    • LS1FC.com
FC Integra Speedometer Customization
« on: September 20, 2013, 10:33:10 AM »
Okay, another service we can do for you:

FC Integra Speedometer "mod"

We will remove your stock FC speedometer, swap the face to an Integra speedometer and modify the housing to fit that speedometer.   I modify the circuit board traces to make it utilize unused factory wiring (20K mile circuit).   I can also remove the buzzers from the circuit board while doing this mod.

I utilize the Integra speedometer needle, painted white to match the FC needles.   The trip reset functionality is retained (as long as it worked on the Integra cluster you sent me!).   I do not like to do the mileage reset on the cluster as the odometer can be difficult to get to behave properly afterwards.

Cost:   $75.00 + S&H and materials.

You can provide your FC cluster + Integra cluster or I can track down one or both for you at additional cost.
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...  project car
2016 BMW 428i xDrive Gran Coupe - Completely stock...ish

Offline digitalsolo

  • Administrator
  • Top Fuel
  • Location: Fort Wayne, IN
  • Posts: 22575
  • View Gallery
    • View Profile
    • LS1FC.com
Re: FC Integra Speedometer Customization
« Reply #1 on: October 18, 2013, 10:51:42 PM »
Here is an example of a completed cluster;  ignore the small crack in the front "glass":

Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...  project car
2016 BMW 428i xDrive Gran Coupe - Completely stock...ish

Offline Ebush

Re: FC Integra Speedometer Customization
« Reply #2 on: October 19, 2013, 11:45:07 AM »
I might buy an extra FC cluster and get an Integra cluster to send you so I can have this ready to swap in after I do my swap. Looks like a 94-01 Integra speedometer?

Offline digitalsolo

  • Administrator
  • Top Fuel
  • Location: Fort Wayne, IN
  • Posts: 22575
  • View Gallery
    • View Profile
    • LS1FC.com
Re: FC Integra Speedometer Customization
« Reply #3 on: October 19, 2013, 07:50:41 PM »
Correct-o.
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...  project car
2016 BMW 428i xDrive Gran Coupe - Completely stock...ish

Offline usmcpi

Re: FC Integra Speedometer Customization
« Reply #4 on: October 28, 2013, 06:58:46 PM »
If one wanted a more custom setup such as Speedhut, Pro Sport, Autometer, (insert brand here), gauges...doable?

Offline digitalsolo

  • Administrator
  • Top Fuel
  • Location: Fort Wayne, IN
  • Posts: 22575
  • View Gallery
    • View Profile
    • LS1FC.com
Re: FC Integra Speedometer Customization
« Reply #5 on: October 28, 2013, 07:24:44 PM »
But of course.
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...  project car
2016 BMW 428i xDrive Gran Coupe - Completely stock...ish

Offline usmcpi

Re: FC Integra Speedometer Customization
« Reply #6 on: November 02, 2013, 05:12:31 PM »
Price?  (not including prices of gauges)

Offline atli126

  • Launching!
  • Location: ky
  • Posts: 1844
  • my fc 5.3/t56 got 25+ mpg :)
  • View Gallery
    • View Profile
Re: FC Integra Speedometer Customization
« Reply #7 on: May 28, 2014, 05:42:38 AM »
I'm interested in this. I also have a few extra fc clusters and my integra cluster ready to go. Where are you located for Shipping? I hate that my speedo doesn't work.
-Bret
87 RX7 5.3/t56 TII Check it out >>>>http://www.502streetscene.net/forum/showthread.php?t=181938&page=4

"no one ever said it would be cheap and easy, they just said it would be worth it"

"Whatever you do, don't lose your passion. Without it who are you?" -Me

Offline Adibee

Re: FC Integra Speedometer Customization
« Reply #8 on: October 21, 2014, 03:03:33 PM »
Hi  DigitalSolo are you still doing this  customization?

Offline digitalsolo

  • Administrator
  • Top Fuel
  • Location: Fort Wayne, IN
  • Posts: 22575
  • View Gallery
    • View Profile
    • LS1FC.com
Re: FC Integra Speedometer Customization
« Reply #9 on: October 21, 2014, 06:23:18 PM »
Sorry, I'm not currently.   My day job doesn't permit any side work.
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...  project car
2016 BMW 428i xDrive Gran Coupe - Completely stock...ish

Offline N3BP

Re: FC Integra Speedometer Customization
« Reply #10 on: March 04, 2019, 09:12:40 PM »
I know this is an old topic, but are you still preforming this service?

Thanks!