May 29, 2020, 06:45:23 AM

Author Topic: Introduction!  (Read 6172 times)

Offline Ryan@BallisticSpeedParts

  • Moderator
  • In The Bleach Box
  • Location: Orlando, FL
  • Posts: 77
  • View Gallery
    • View Profile
    • Ballistic Speed Parts
Introduction!
« on: February 06, 2013, 10:41:10 PM »
Greetings NoRotors!

We are Ballistic Speed Parts out of Orlando FL, we appreciate the opportunity and we are proud to be a new vendor for the NoRotors community.  We are here to provide the NoRotors community with a resource for competitively priced LSx Speed, Performance, and Custom Aftermarket parts.  We also stock many factory GM parts and we can source any part that you may need if we donít already carry it.

Ballistic Speed Parts was formed over 3 years ago; we are two brothers with a passion for automotive performance and our focus is the LS based engine and anything LSx related.  Our company evolved out of the development and testing of custom parts we were making for our project car which is an LS1 powered 1993 Rx7.  Our project car quickly turned into our test mule that we use to R&D the custom parts we make, as well as testing of branded parts we decide to carry, giving us the opportunity to provide our customers with first-hand knowledge and feedback of many of the parts we sell.

I have been a NoRotors member since 2010 and was also a previous V8Rx7 member.  Our goal is to be an asset to the NoRotors community and we will strive to provide exceptional service and knowledgeable information.  Please check our vendor forum often as we will be continuously updating and adding additional parts and services for sale.

For more info please check us out at: www.BallisticSpeedParts.com

Email:  Sales@BallisticSpeedParts.com
             Tech@BallisticSpeedParts.com

Call:  1-800-605-7071

Thanks!!
 
Ryan Allen
Ballistic Speed Parts 

Offline kartermdb

Re: Introduction!
« Reply #1 on: February 07, 2013, 02:45:49 PM »
Are you located in the plaza on the corner of RedBug and Tuskawilla?

Offline Ryan@BallisticSpeedParts

  • Moderator
  • In The Bleach Box
  • Location: Orlando, FL
  • Posts: 77
  • View Gallery
    • View Profile
    • Ballistic Speed Parts
Re: Introduction!
« Reply #2 on: February 07, 2013, 04:08:48 PM »
Are you located in the plaza on the corner of RedBug and Tuskawilla?

Yes, but that is where we only do our shipping and receiving from.  At this time we do not have a shop that is open to the public.  We are discussing opening the doors sometime in the future and offering local bolt-on type service's and some engine assembly, but that is not our main focus at the moment.

Offline TEDDER1

Re: Introduction!
« Reply #3 on: December 07, 2013, 09:11:58 PM »
In case anyone is curious about these guys I have bought most of my swap parts from them...

Gasket sets/packages
Comp cam 235/243
rollermaster double timing chain
5/16 pushrods 7.400
PAC double springs
powerbond pully
MSD Atomic EFI for LS engines
FAST 102
90mm Throttle body
GM corvette accessory system [PS, AC, ALT and hardware]
Aluminum driveshaft off the shop car [local deal]

They are good people and provide fast service.