November 23, 2020, 10:48:16 PM

Author Topic: Weld RTS on FD: My Pics and Info  (Read 9669 times)

Offline Esser

Re: Weld RTS on FD: My Pics and Info
« Reply #30 on: October 27, 2020, 02:03:12 PM »
You want 6.5 if you have widebody like that. The picture is deceiving in the air.

15x9 with 6.5" fits stock body

If you are going for maximum fit you can do 7" backspacing and 10.5 - 11 widebody only

Offline Ae20b

Re: Weld RTS on FD: My Pics and Info
« Reply #31 on: October 31, 2020, 11:13:19 AM »
You want 6.5 if you have widebody like that. The picture is deceiving in the air.

15x9 with 6.5" fits stock body

If you are going for maximum fit you can do 7" backspacing and 10.5 - 11 widebody only

If i got 7" BS doesnt that make the wheel go further into the wheel well? Thats not what I want. I want almost flush. So for example If I have a 15x10 with a 4" BS it will sit further out of the fender then a 6.5" BS

What would suggest for a 15x10 wheel?
« Last Edit: October 31, 2020, 11:18:52 AM by Ae20b »

Offline Esser

Re: Weld RTS on FD: My Pics and Info
« Reply #32 on: November 02, 2020, 05:27:02 PM »
It really depends on the tire. for a 15x10 you will want backspcing to be around 7-6.5"

If you dont have a widebody then do 7. dont go wider than a 11.50 tire