May 19, 2019, 08:27:02 AM

Author Topic: fox body 8.8 conversion  (Read 35707 times)

Offline AKINA FC

Re: fox body 8.8 conversion
« Reply #165 on: July 30, 2015, 04:44:14 PM »
Was thinking about it!  :cheers:
[smg id=6531]

Offline justinsamberg

  • Moderator
  • Staged
  • Location: Pleasant Hill, California
  • Posts: 574
  • View Gallery
    • View Profile
    • http://www.sambergperfomance.com
Re: fox body 8.8 conversion
« Reply #166 on: July 25, 2016, 04:10:31 PM »
Im putting together a few of these kits.. They now have an adjustable lower link! 

http://www.rx7v8.com/
Samberg Performance Fabrication
Pleasant Hill, CA
justinsamberg@gmail.com
925-484-5800

Offline Anthonynyc

Re: fox body 8.8 conversion
« Reply #167 on: September 18, 2017, 04:08:17 AM »
Im putting together a few of these kits.. They now have an adjustable lower link! 



Nice that it is adjustable now.

I have a few friends that are interested in this setup but have a few questions.

When I bought the front QA1 setup, you had that spacer in the front but I saw another setup that does not have that front spacer anymore, looks like the spring is much shorter, can you share some more info on that setup?

From the ones you sold so far has anyone run them down the quarter with results? 

If you can share any info that you have learned in the past that would be great, like updated spring rates etc anything at all.

They made quite a few changes in the NE for a huge event and a lot more 3rd gens are gearing up to run.

Thanks,

Anthony