July 20, 2019, 12:33:57 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Troux

Pages: [1] 2 3 ... 58
The Lounge / Subaru BRZ Shell for Cheap on Copart! Desperate for a Swap!
« on: December 06, 2015, 02:34:11 AM »
On Copart right now. For those who want to build a BRZ/FRS/86. Rocket Bunny Kit + Chromoly Roll Cage + Clean Body!

Someone PLEASE do it.



Suspension/Brakes/Wheels / Re: Anyone ever use 295/30/18 R888's?
« on: November 13, 2014, 11:15:19 PM »
I ran them on 10" +50 CCWs front and back with rolled fenders (no push out). The front were fine, the backs rubbed a little on the inside, but nothing a little hammering couldn't fix.

I don't have any kind of detailed pictures of the tires and fitment, but here's pics of them installed.

The Lounge / Re: Whatever the "stock bottom end" 5.3 record used to be...
« on: September 30, 2014, 01:59:36 AM »
How high he's spinning it determines whether or not those rod bolts are power adders or just wise insurance. It's an absolutely awesome run in a fantastic car/motor combination, and I understand it's fun to find out how far factory parts can go, but stretching the rules to fit into an abstruse competition with no rules to begin with just seems like a waste of time.

Any 1/4 slips?

Fabrication / Re: 3d scanning and Injection Molding
« on: September 05, 2014, 10:35:46 PM »
Might as well share it in this thread, also:

They print your models, for those that don't want to buy a printer.

Parts for Sale / FD: Black OEM Door Sills, Great Condition
« on: August 25, 2014, 03:08:04 AM »
Located in central FL.

For sale is a pair of stock black plastic FD door sills aka scuff plates aka kick guards. There are a couple small scratches on the visible side, and some stressed plastic on the bottom, but all of the clips are there and they fit snugly. These came off an 18K mile car.
$50 OBO, shipping not included

Fabrication / Re: ls3/ls7 maf hole cover
« on: August 09, 2014, 06:58:46 AM »
For those unaware:

Submit your CAD, wait for your print in the mail. Great prices, great options.

The Lounge / Re: Encounter with couple racist kids
« on: July 18, 2014, 01:56:05 AM »
Like I said, I don't believe that's generally applicable to the majority of patriots or religious folks, so much as it is applicable to scoundrels. Does that make sense? The only folks this is meant to paint with a broad brush are "scoundrels" (lol). These are popular ways to lend one's self legitimacy. Which again, is not to say that the majority of patriots (of any given nation or cause) or religious folks (of any given religion) are merely 'lending themselves legitimacy". Do you see that I'm making that distinction?
+1. KKK and Third Reich both operated under religious and patriotic self-validation, and that line of thinking is still very prevalent today.

The Lounge / Re: A 1988 Kia RX-7
« on: June 29, 2014, 11:41:03 PM »
It looks clean as hell, but the location shows it being in the middle of a river, so I'd suspect flood damage.

The Lounge / Re: New Drag Racing Game
« on: June 29, 2014, 11:39:18 PM »
You can tell this was done by YellowBullet when a Shelby GT500 is so low on the power front:

Parts for Sale / Re: Valentine One Radar Detector
« on: May 02, 2014, 04:23:29 PM »
Software and board version.    You can put the serial number in the website and it will tell you.   
It's a 1.8, software 3.826, but it does give me the $200 option of upgrading to 1.85

Parts for Sale / Re: Valentine One Radar Detector
« on: April 28, 2014, 05:13:08 PM »
I'm not sure what you mean by that....I've only ever seen one for sale on their website.

Parts for Sale / Valentine One Radar Detector
« on: April 27, 2014, 05:40:15 AM »
This is a V1 radar detector that is in great shape. Includes spare suction cups, remote adapter, visor attachment and manual. No problems whatsoever. If you're here, you probably already know that this is arguably the best radar detector on the market, so I won't waste time advertising features.

$300 + shipping

Cars for sale / Re: 1994 Mazda RX-7 LS2 V8 Swap LOW Miles
« on: March 15, 2014, 12:46:35 PM »

Cars for sale / Re: 1994 Mazda RX-7 LS2 V8 Swap LOW Miles
« on: March 05, 2014, 04:05:29 AM »
18k on chassis or swap? if on chassis this is under priced haha
Chassis, see dash pic.

Cars for sale / Re: 1994 Mazda RX-7 LS2 V8 Swap LOW Miles
« on: March 01, 2014, 05:11:56 PM »
Bump. Also, there are aftermarket toe links and trailing arms on this car.

Pages: [1] 2 3 ... 58