March 22, 2019, 08:10:12 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - justinsamberg

Pages: [1] 2 3 ... 39
1
Samberg Performance / Re: FD 4-point roll bar
« on: February 03, 2019, 03:27:40 PM »
This new version has a fixed harness bar and is considered scca legal.


2
Samberg Performance / FORD 8.8 IRS Conversion V2
« on: January 30, 2019, 12:45:44 PM »
intro price $800 plus shipping (axles not included)

axles and inner cv kit. $1350

3.5 alum driveshaft $525










3
Samberg Performance / Re: HEADERS FD 2" LEFT & RIGHT HAND DRIVE HEADERS
« on: December 27, 2018, 11:30:40 AM »
We need to test fit these on a right hand drive car before I run them all. The samples up above were made on a mock up right hand drive car, not the real thing.

4
Samberg Performance / Re: HEADERS FD 2" LEFT & RIGHT HAND DRIVE HEADERS
« on: November 10, 2018, 11:39:33 AM »
All the jtr headers I fit always hit the floor pan on the left side. I've moved these down to clear the floor pan and there as close as I feel comfortable with. The right could of gone up alot more but instead I bought those down as well to mach the ground clearance on the right side. The cars that are really low are going to have a problem with these if they don't switch to at least 650 spring.

5
Samberg Performance / Re: FD 2" LEFT & RIGHT HAND DRIVE HEADERS
« on: November 04, 2018, 06:58:34 PM »
$1300 is what I need to get for them to make $ but ultimately the market will decide the price not me.

6
Build Threads / Re: UK RHD LS1 8.8 FD Gunnytron's build thread
« on: November 04, 2018, 10:26:07 AM »
Would one of you guys test fit my right hand drive headers?

7
Samberg Performance / Re: FD 2" LEFT & RIGHT HAND DRIVE HEADERS
« on: November 04, 2018, 10:07:41 AM »
Over 32" They only work well with a 4 into 1 collector. Just so you know a try-Y merge set up is not work well with tubes this long.

8
Samberg Performance / HEADERS FD 2" LEFT & RIGHT HAND DRIVE HEADERS
« on: November 04, 2018, 01:23:55 AM »
I've been working on these for a few months now and I want to release these in the next month or so. I've revised these 3 times now and im pretty happy with the end result! They fit really well!
Unlike the JTR headers you won't have to beat in the driver side floor pan in to make them fit!

The last JPEG model is of revise 2. The spark plug clearance was bad on cylinder number one so we made the changes necessary to the front tube to resemble what you see in the picture of R3.

The tubes you see in the photos are pre-production sets that have been modified to become revision 3 models. The production tubes will not have any splices in them. One piece all the way!

I've done these in both 16 gauge and 20 gauge for comparison. I feel the 16 gauge is a little heavy because of how long the tubes are, but are easy to work with. How ever the 20 gauge 304 stainless is very light but must be mig welded in order to be assembled in a way that's efficient.


-2" SS tubes 3.5" collector
-I'm also going to offer these with no collector. This way you can use your own slip fit merge collector.

- fits both right and left hand drive cars
- all spark plug boots have good clearance
- Starter can be removed without taking the header off

Im building 20 sets of these on the first run.

Keep in mind that these are just hand built samples. The production version will have no splices any where in the tube.

right side R3


right side R3 model



left side R3 photo


left side R3 model



9
Samberg Performance / Re: FD 4-point roll bar
« on: October 30, 2018, 07:14:30 PM »
This is a double post from rx7club.



This is what I have so far.... The 1/2 rod ends on the diagonal aren't wide enough. Other than that the range of motion is more than anyone will ever need!






10
The Lounge / FREE GENERAL ADMISSION TO LUGUNA SECA
« on: August 29, 2018, 12:41:47 PM »
For Customers and Friends of Samberg Performance, I have about 100 tickets to the Continental Monterey Grand Prix! These are Courtesy of Melissa Kangas, the GM of Michael Stead Cadillac, Walnut Creek.

If your interested in going please message me on this forum with your shipping address.


One packet per address includes: two 3 day tickets for September 7-9, 2018 and a 3-day parking pass for one car.


11
Samberg Performance / FREE GENERAL ADMISSION TO LUGUNA SECA
« on: August 29, 2018, 12:34:41 PM »
For v8 rx7 owners and friends of Samberg Performance, I have about 100 tickets to the Continental Monterey Grand Prix! These are Courtesy of Melissa Kangas, the GM of Michael Stead Cadillac, Walnut Creek.

If your interested in going please message me on this forum with your shipping address.


One packet per address includes: two 3 day tickets for September 7-9, 2018 and a 3-day parking pass for one car.


12
Samberg Performance / Re: Radiator Set up list need 5 people
« on: April 18, 2018, 12:26:06 AM »
Yes I have these in stock. PM me.

13
General Tech / Re: Headers! Who is still making/selling them?
« on: February 05, 2018, 12:10:17 PM »
Mine are going to be better

14
General Tech / Re: Headers! Who is still making/selling them?
« on: February 03, 2018, 10:52:06 PM »
I don't think he minds if i make them..

15
General Tech / Re: Headers! Who is still making/selling them?
« on: February 03, 2018, 11:01:04 AM »
Id like to offer long tube header since know one is really making them anymore. There's always been demand for a Y-pipe as well. So I'm in the process of finding an FD once again. Does anyone want make a deal with me?

Pages: [1] 2 3 ... 39