June 06, 2020, 02:59:59 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - PanicSteve

Pages: [1] 2
1
Parts WTB / WTB Single FD wheel
« on: December 28, 2014, 07:21:08 PM »
As the title states, need a decent OEM wheel, need not be perfect. Let me know what cha got, PM pics please.

2
The Lounge / You think your 6.0 is big? Get some of this!
« on: December 01, 2014, 08:44:59 PM »



3
Parts for Sale / FD R1 DIN pocket
« on: November 13, 2014, 05:13:04 PM »
R1 style single DIN pocket with the flippy lid, $65 shipped in the continental US. Finishes the dash off nicely.

4
Parts for Sale / FD Fitment Enkei RPF1 17" set of 3! 17x9 17x9.5
« on: November 12, 2014, 04:50:29 PM »
Parting out my FD mishap, got three Enkei RPF1's (two fronts, one rear). Front are 17x9" 45MM offset, rear is a 17X9.5 38MM offset. Good used condition, round up one more 17X9.5 and you are in business. Round and true, minor blemishes, stains, etc. Nothing a good scrubbing won't help. $550 OBO plus shipping from 29172,

5
Parts for Sale / FD Samberg LS mounting kit
« on: November 06, 2014, 04:51:08 PM »
Only a few thousand miles of use, powder coated black, with rack spacers, bumpsteer kit and transmission crossmember, plus a urethane trans mount, corvette pedestals and rubbers for those. Don't have the diff mount as I was 8.8 and sold that package separate. This is engine and trans mounting parts plus the mounts I bought separate. $1200 shipped in the lower 48. Still under the car at the moment, so no pics, but you've seen it all before.

6
Parts for Sale / LS1 Zoom clutch kit with aluminum flywheel NIB!
« on: September 18, 2014, 05:45:08 PM »
Zoom LS1 clutch kit with 12lb aluminum flywheel and new clutch slave cylinder, never made it to the new build, my loss, your gain. $450 shipped in the continental US. Removed from the package for the first time for the photo.

7
Parts for Sale / FD fuel sending unit w/Aeromotive 340LPH pump
« on: September 18, 2014, 05:42:06 PM »
Good for the 400WHP I was making, only about 3000 miles of use on the pump, save a few bucks on your build after the death of mine. $150 shipped in the continental US.

8
Panic Motorsports / Just want to say hello!
« on: September 13, 2014, 10:07:31 PM »
Greetings everyone!

Just wanted to drop in and say hello, tell you a little bit about Panic Motorsports. We are a Spec Miata prep shop in West Columbia SC, but have a very soft spot for swapped RX-7's. I'm Steve Bertok (owner) I've done an FC and FD swap, about to complete my second FC (track rat budget special). My head wrench Josh Smith is well known to you guys (sabre002) and has just completed his nasty nasty nasty FD, lacking only some tuning to hit the street. My parts knowledge and his tech knowledge make for an unbeatable combination. We spend a lot of time at the racetrack with the Miatas as that's our primary business, but are looking forward to developing an LSx FD for SCCA racing in the 2015 season.

We're also looking forward to helping this community any way we can. We run an ebay store (panic_motorsports) that has more salvage parts being listed daily. It gives us a way to get parts out there you can check out 24 hours a day, and provides a decent look into what we are parting at any given time.

 New parts; send me a part number and let see what we can do for you. We're not Summit or Jegs, but can get our hands on most of the same stuff, give us a shot. We also have a couple of things under development for the swapped 7's, including a trick radiator with an integral oil cooler that makes a really slick install, stay tuned for that!

Salvage parts; current cars of interest to this board, parting my personal swapped FD that met an unfortunate demise. (don't ask, it's embarrassing). Sold the diff package this week, have a large portion of the rest of the car to go. Check out my listings in the classifieds for some stuff available right now. We also have a front end damaged FD being stripped, a rolling shell that will be available very soon for someone wanting to build a track rat. Couple of stray FC's hanging around we haven't got to stripping yet. Let us know what you need, we'll do our best to fill the order.

9
Parts for Sale / Samberg FD rear cradle, cobra diff, DSS axles & driveshaft
« on: September 10, 2014, 01:27:28 PM »
Your bolt in FD rear end solution, right here. Bolt straight into 94-95 FD chassis, will require the "wings" Samberg supplies to do in a 93 as they are welded in pieces. Comes complete as shown with axles, driveshaft, subframe and diff. 3.31 ratio gears currently installed. Subframe is powder coated black. Only issue at all is a hairline crack in the aluminum rear cover (see epoxy repair) that'd I'd weld up before I put the diff back in. Was in my car for months, only put a few drops of fluid on the ground. Figured it'd be back out at some point and I'd weld it then. Car plans have since changed, so the car is being parted. These parts have literally just a few thousand miles on them. $2200 picked up in West Columbia SC, can pack and ship at buyers expense.

10
Parts for Sale / 2013 Gen5 Camaro T6060 6 speed ZERO MILES
« on: September 10, 2014, 11:33:21 AM »
As stated, 2013 Gen 5 Camaro T6060 six speed trans, pressure plate and flywheel included (disc got missing somehow) AND a new in the package ZL1 shifter assembly with the spiffy suede shift knob. All parts have ZERO miles on them. $2400 OBO picked up in West Columbia SC, can crate and ship at buyers expense.

11
Parts for Sale / FD custom built roll bar
« on: September 10, 2014, 11:25:27 AM »
Got this from Charlie at Mazcare, bolts to the shock rear shock towers, you'll need to fab two small tabs for the bottom mount that is welded in. Really nice bar with harness bar. Bottom was bolted in for test fit, but never wound up in the car it was intended for. $450 picked up in West Columbia SC, can ship at buyers expense.

12
Parts for Sale / Hinson FD cooling system, dual fan, with hoses
« on: September 10, 2014, 11:02:12 AM »
Gently used Hinson FD dual fan cooling system, bolt in ready to go. Comes with hoses as shown, one small bump on the bottom corner (doesn't affect performance in any way) was only in the car for a few thousand miles. $600 OBO shipped in the lower 48.

13
Parts for Sale / Hinson FD mid-length headers
« on: April 02, 2014, 08:03:24 PM »
Pair of mid-length Hinson FD headers, will clear automatics. Wrapped with $200 worth of DEI titanium header wrap. They fit well, tight on the steering shaft because of the wrap, but that's it. $600 shipped in the continental US. Will get a picture up in the next day or so.

14
Parts for Sale / 2004 241 LS-1 cylinder heads 82K miles
« on: July 03, 2012, 11:30:34 AM »
For sale, pair of OEM 241 casting assembled cylinder heads, out of an 04 GTO with 82K miles. No rocker arms, but have them and will include if you want them. $300 shipped anywhere in the continental US. Local pickup in West Columbia SC welcome and free. Call or text Steve 803-261-7629 or PM here.

15
Parts for Sale / LSx radiator and fan assembly
« on: June 03, 2012, 12:19:49 PM »
Bought this setup from EBush a few months ago, changed my mind on which way to go with the cooling and never used this one. 19x17x2.25" core, nice custom shround and big honkin' fan. Should cool most anything you'd want it to. Had some sketchy brackets welded on and then removed before I even got it. Has never had coolant in it, thus, new. $250 shipped in the continental US.

Pages: [1] 2