April 20, 2024, 09:13:54 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - the burning giraffe

Pages: [1] 2 3 ... 9
1
General Tech / RHD power steering line length
« on: October 06, 2018, 05:41:22 PM »
A long shot but anyone know the length of the pressure line? pump to rack? LS1 FD

Thanks!

2
Drivetrain / Re: 3" catback exhaust restrictive
« on: March 22, 2015, 11:40:41 PM »
Thanks for the replies. At this stage I think it will probably cost at least 2k to redo the whole exhaust another 2.5k for heads and cams at least. Is it worth it?
Im not running any mufflers! :cheers:

3
Drivetrain / Re: 3" catback exhaust restrictive
« on: March 18, 2015, 06:34:31 AM »
ok thanks guys Ill dyno sometime in the future to see how it goes!

4
Drivetrain / Re: 3" catback exhaust restrictive
« on: March 17, 2015, 12:19:37 PM »
OK thanks. If I get 3/4 long tube headers and a cam down the track will the car back still be OK?

5
Drivetrain / 3" catback exhaust restrictive
« on: March 16, 2015, 05:12:17 AM »
I have the following setup
ls1
stock ls3 headers
twin 2.5" y pipe into 3" catback

engine is stock, CAI and Mafless, would you think this catback is restrictive?

6
Electronics / Re: Ls1 Harness, all wires connected to power
« on: November 01, 2013, 05:35:31 AM »
ok thanks for that. Im not with the car at the moment but there are some green wires as well? Ill have to check

7
Electronics / Ls1 Harness, all wires connected to power
« on: October 30, 2013, 07:15:41 AM »
hi guys,

Just put in my new engine harness (OEM). Ive connected all the 4-5 wires straight to power, I think the 2 orange wires are meant to be ignition but I am not sure. So that is why I connected all to power. IS this ok? Will it fry anything? My car is missing at the moment, just wondering if this has anything to do with it. It has a maffless tune as well.

8
Electronics / Re: Plug above starter motor ls1
« on: October 18, 2013, 10:51:01 PM »
OK thanks guys I will see if I can take a pic. I think I might have found the plug actually

9
Electronics / Plug above starter motor ls1
« on: October 18, 2013, 12:52:20 AM »
Guys got a quick question, what does this plug do? because it seems as though there is no plug on it on my engine harness, perhaps someone cut it off.

Thanks

10
Electronics / Re: o2 Sensor wiring
« on: October 04, 2013, 12:34:30 AM »
hmm no unfortunately there is nothing on them except ABCD

11
Electronics / Re: o2 Sensor wiring
« on: October 01, 2013, 01:22:48 AM »
Anyone?

12
Electronics / Re: o2 Sensor wiring
« on: September 28, 2013, 09:06:06 AM »
thanks guys I got the o2 sensors about 30cm away from the factory manifolds so should be ok. but can someone tell me which wiring i should use? and these are front or rear sensors?

13
General Tech / Re: RHD Headers
« on: September 25, 2013, 07:56:36 AM »
If enough people are interested the exhaust shop would be willing to do them cheaper

14
Electronics / Re: o2 Sensor wiring
« on: September 25, 2013, 01:26:13 AM »
Thanks guys for the help. However my sensor has 2 white wires and one grey and on
e black. So no can I tell which one is which

15
Electronics / o2 Sensor wiring
« on: September 22, 2013, 10:17:30 AM »
Hi guys,

Which wires do I connect from my o2 sensors to my ecu?

here is the pinout:

http://chevythunder.com/2004_gto_pcm_pinouts.htm

and I have 4 wire o2 sensors like this:

http://www.ebay.com.au/itm/2-x-NEW-Holden-Commodore-V6-V8-VS-VT-VU-VX-VY-VZ-VE-LS1-2-3-Oxygen-O2-Sensors-/110932273760?pt=AU_Car_Parts_Accessories&hash=item19d4142a60&_uhb=1

Thanks!

Pages: [1] 2 3 ... 9