March 28, 2020, 09:53:02 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Skeltic

Pages: [1] 2 3 ... 44
Drivetrain / Re: Clutch recommendations
« on: September 09, 2019, 01:25:23 PM »
if you guys go for an aluminum flywheel , you might need a retune to your ecu , I needed to have my "follow" adjusted. When I installed my frezelli flywheel

General Tech / Re: Click Click Start Issue
« on: August 17, 2019, 01:01:19 AM »
I just did this installed a 30-40 amp 9$ Weather proof relay as a solenoid booster, works like a charm. Found a link with a great mounting idea after the fact.... cant find it anyway there is a nice mounting hole  already  on the oil pan just waiting to get screwed with a relay.

Cobranut, I have gone though 3 switches that only worked the first time i turned on the ac. I just run with it jumped. I am paying attention for an answer.

General Tech / Re: Car seems twitchy
« on: June 20, 2019, 01:47:54 PM »
I don't like that toe setting, I have had that same problem, still do but not as bad, I would recommend 0 toe in the front erroring on a C hair toe in. I would put something tall with some detail on it (2x4)  up against the rear  left tire, I would adjust the steering so that the right front sights perfectly in line with the right rear tire then see where the left  lines up  on that detailed 2x4 . I would want the front left  tire to line up between  3/8" and 0 on the board from the tire. This will calm down the dartyness a bit. Your rear steer is another matter. Could be anything from soft engine mounts to warn pillowballs

General Tech / Re: ATI Damper Part Number
« on: June 19, 2019, 03:00:03 PM »
there are 3 sizes, truck size camero size and ctsv size that is also the accessories that gmpp sells, there is also the vette.... size. Basically what are your accessories from?

General Tech / Re: Oil Pan Part Number
« on: June 09, 2019, 10:28:31 PM »
Just putting it out there... Now would be the time to consider a daily dry sump...  Just saying

Road Racing/Autocross / Re: Fuel slosh.... need help/opinions
« on: June 06, 2019, 03:53:43 PM »
I will also add I bought  a big one 750$, and my tanks baffles broke so  I took them out so I have really good access to the bottom of the tank

Road Racing/Autocross / Re: Fuel slosh.... need help/opinions
« on: June 06, 2019, 11:40:19 AM »
as they show in the videos as long as any of it is touching fuel it works. I have had it sitting in fuel for a year now and it is still fine, I think that it should hold up. If not they used the wrong material and will have a lot of warranty work to do.

Road Racing/Autocross / Re: Fuel slosh.... need help/opinions
« on: June 06, 2019, 10:46:04 AM »
Agree with Exidous, I had the same problem. Spent alot of money on surge tanks aux pumps pressure regs and gauges,no bueno. Holly fuel mat Hydramat solved it. Now it will run  till out of gas. But when its out of gas it is REALLY out of gas

The Lounge / Re: Hilarious video build thread - AWD 2.0L Classic Mini
« on: October 03, 2018, 11:57:27 PM »
zap straps to tie down the hot battery cable, for shame!

Build Threads / Re: Spacevomit's FD33 Project: Behind the Candelabra
« on: September 23, 2018, 03:48:02 AM »

Well that didn't fucking work

Cars for sale / Re: 1993 rx7 FD Touring $2500
« on: June 29, 2018, 05:40:25 PM »
I'd take it if you weren't so damned far away.
me too

Cars for sale / Re: 1993 rx7 FD Touring $2500
« on: June 29, 2018, 12:38:58 AM »
interested but I need more details on the dog

I am tentatively on the list please

Suspension/Brakes/Wheels / Re: ABS/brake issue
« on: February 24, 2018, 10:03:34 PM »
take the sensors off and clean the mounting surfaces, be as thorough as possible that is where I got my biggest gains getting the sensors to  work better

Pages: [1] 2 3 ... 44