May 06, 2024, 10:33:15 PM
« previous next »
Pages: [1]

Author Topic: Ronin FC 8.8 IRS Mounting Kit  (Read 4138 times)

Offline SbcJim

Ronin FC 8.8 IRS Mounting Kit
« on: October 12, 2014, 06:55:34 PM »
I have a brand new never installed ronin 8.8 kit for an FC.  Priorities have shifted and I no longer have time for the car.  I put a quick coat of paint on the mount to prevent rusting.  It has never been mounted in a car.

Along with the mounts I also have the modified differential to go with the kit. The differential is a 3.73 limited slip unit with less than 80k on it from an Explorer.

I am looking to get $1200 plus the ride.

http://images.craigslist.org/00K0K_8zcp57qVRPM_600x450.jpg
Logged
LM7, PSI Harness, Truck ECU, LS1 Intake, SSR Long Tube Headers, Ported & Shaved 243 Heads, LS7 Lifters, S4 Turbo II Rear Diff, 4l80e, Jakes Performance Black Box, Nitrous Outlet 150 hp Shot, 228/228 TSP Cam, Beehive Springs, Pro-Sport Gauges, Autopower 6pt Cage, FD Seats....etc., etc., etc.

Offline largeorangefont

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #1 on: October 12, 2014, 10:33:05 PM »
Wow great deal here guys!!
Logged
Quote from: cool
Sell it to spacevomit.  He'll finish it.

Offline mech-head

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #2 on: October 13, 2014, 12:56:22 PM »
Where are you located? This would save someone a good chunk of change.
Logged

Offline SbcJim

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #3 on: October 13, 2014, 01:27:35 PM »
Located in Wisconsin. I am near the Fond du Lac area. Where abouts in Nebraska are you from?
Logged
LM7, PSI Harness, Truck ECU, LS1 Intake, SSR Long Tube Headers, Ported & Shaved 243 Heads, LS7 Lifters, S4 Turbo II Rear Diff, 4l80e, Jakes Performance Black Box, Nitrous Outlet 150 hp Shot, 228/228 TSP Cam, Beehive Springs, Pro-Sport Gauges, Autopower 6pt Cage, FD Seats....etc., etc., etc.

Offline boost!

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #4 on: October 13, 2014, 03:09:25 PM »
WOW! If only this were posted 3 months ago. Great deal here!
Logged
Alex
New Setup:
1990 Mazda RX-7, Stock Block LS1, Stage 3-R 243's, Nitrous Outlet 78mm Plate Kit, Custom Grind Cam, LS6 Intake Manifold, LS6 Ported Throttle Body, JTR Headers, Hinson Intake, T-56, Ronin 8.8, 3.73 Gears, DSS Pro Level Axles, 275 MT ET Streets
PB E.T.: 10.62 @ 131
PB MPH: 10.81 @ 135

Old Setup:
1990 Mazda RX-7, LS1, T-56, Ronin 8.8, 3.73 Gears, TR224, LS6 Intake Manifold, LS6 Throttle Body, JTR Headers, GFO Intake, 275 MT ET Streets
PB: 11.16 @ 122

Offline just startn

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #5 on: October 13, 2014, 04:08:40 PM »
I just need the mount, ready to buy. Let me know.
Logged

Offline SbcJim

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #6 on: October 13, 2014, 04:57:28 PM »
Quote from: just startn on October 13, 2014, 04:08:40 PM
I just need the mount, ready to buy. Let me know.

I would prefer to keep everything together unless there would be a buyer for everything else.
Logged
LM7, PSI Harness, Truck ECU, LS1 Intake, SSR Long Tube Headers, Ported & Shaved 243 Heads, LS7 Lifters, S4 Turbo II Rear Diff, 4l80e, Jakes Performance Black Box, Nitrous Outlet 150 hp Shot, 228/228 TSP Cam, Beehive Springs, Pro-Sport Gauges, Autopower 6pt Cage, FD Seats....etc., etc., etc.

Offline mech-head

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #7 on: October 14, 2014, 03:45:31 PM »
Quote from: SbcJim on October 13, 2014, 01:27:35 PM
Located in Wisconsin. I am near the Fond du Lac area. Where abouts in Nebraska are you from?

I am just outside of Omaha.  I have the 8.8 already sitting in my garage, so I am in the same situation as boost! "I wish that I could have run into this 3 months ago".  It should sell pretty fast.
Logged

Offline BlnLs1/rx7

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #8 on: October 15, 2014, 02:52:57 PM »
How close are you to Eue Clair?
Logged

Offline SbcJim

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #9 on: October 15, 2014, 04:22:23 PM »
Quote from: BlnLs1/rx7 on October 15, 2014, 02:52:57 PM
How close are you to Eue Clair?

Right around the 3 hour mark.  I am always up for a little bit of a road trip.  ;)
Logged
LM7, PSI Harness, Truck ECU, LS1 Intake, SSR Long Tube Headers, Ported & Shaved 243 Heads, LS7 Lifters, S4 Turbo II Rear Diff, 4l80e, Jakes Performance Black Box, Nitrous Outlet 150 hp Shot, 228/228 TSP Cam, Beehive Springs, Pro-Sport Gauges, Autopower 6pt Cage, FD Seats....etc., etc., etc.

Offline N2v8fcs

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #10 on: October 16, 2014, 05:27:17 PM »
sweet deal
Logged
:drive:
new personal best 11.45 @ 120 mph N/A car...9.11 @152 mph for the turbo car.


1987 FC  355 SBC, T-5, T2 rear        retired 5-4-11
1991 FC  383 SBC, sold to Dad. Now 5.3 w 76mm turbo, G-force T-5, 8.8 Ronin rear 
1990 FC  370 CID 6.0 w 88mm turbo, Powerglide, Ronin 8.8 w 3.15 gears

Offline eage8

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #11 on: October 24, 2014, 08:33:21 PM »
Sold to me :)
Logged
'89 RX-7 TurboII - Ronin Widebody and Ford 8.8 - 13B lolz
'89 Corolla SR5 - 4A-GE 20 Valve 6 speed swap Megasquirt
'01 Impreza 2.5RS - Daily driver/rally-x car
'81 BMW R65

Offline largeorangefont

Re: Ronin FC 8.8 IRS Mounting Kit
« Reply #12 on: October 24, 2014, 08:35:06 PM »
 Welcome to the club! Glad you picked this one up!

You are one step closer to going V8 :)
Logged
Quote from: cool
Sell it to spacevomit.  He'll finish it.
Pages: [1]
« previous next »